home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 2
/
Gold Medal Software Volume 2 (Gold Medal) (1994).iso
/
misc
/
lsr.arj
/
OPTIONS.DOC
< prev
next >
Wrap
Text File
|
1993-11-30
|
5KB
|
105 lines
O P T I O N S . D O C
---------------------
This file instructs you on how to change the options settings file called
OPTIONS.FIL so that you may use the values and settings that you are most
comfortable with and the ones that will allow LSR.EXE to work with your
particular printer. The different options are listed below. For each
option, follow the guidelines specified in order to select the particular
settings and values you want. Edit OPTIONS.FIL with any word processor or
text editor remembering to save the file in pure ASCII format. Be sure
NEVER to let your option setting or value extend past 7 characters,
letters or numbers total. Column 9 must always be a semicolon.
OPTION #1 - OPTION #15 - ORBS (applying and separating) for planetary
aspects.
#1 - natal conjunctions (Default value is 8 degrees).
#2 - natal sextiles (Default value is 8 degrees).
#3 - natal squares (Default value is 8 degrees).
#4 - natal trines (Default value is 8 degrees).
#5 - natal oppositions (Default value is 8 degrees).
#6 - ALL parallels (Default value is 1 degree).
#7 - natal semi-sextiles (Default value is 2 degrees).
#8 - natal semi-squares (Default value is 4 degrees).
#9 - natal sesquisquares (Default value is 4 degrees).
#10 - natal quincunxes (Default value is 5 degrees).
#11 - natal semi-quintiles (Default value is 1 degree).
#12 - natal nonagens (Default value is 1 degree).
#13 - natal quintiles (Default value is 1 degree).
#14 - natal treciles (Default value is 1 degree).
#15 - natal bi-quintiles (Default value is 1 degree).
OPTION #16 - not assigned yet.
OPTION #17 - Do not calculate and list natal minor aspects (option
setting = 0) or calculate and list natal minor aspects (option setting =
1). Default value is 0.
OPTION #18 - #20 - not assigned yet.
OPTION #21 - Orb for harmonic planet aspects to harmonic planets. Default
value is 1 degree.
OPTION #22 - Orb for natal planet aspects to draconic planets. Default
value is 2 degrees.
OPTION #23 - Orb for natal planet aspects to harmonic planets. Default
value is 1 degree.
OPTION #24 - This option allows you to have a constant value
automatically input into the data entry routine for house system. A value
of -99 means that you desire manual entry at all times. If you want
automatic entry, then set this number to the value you want. Be sure your
number is within the limits specified by the program. Default value is 1.
1 = Placidus, 2 = Regiomontanus, 3 = Koch, 4 = Campanus, 5 = Porphyry, -99
= manual entry.
OPTION #25 - #29 - Not assigned yet.
OPTION #30 - Orb of planetary conjunctions to Arabian Parts. Default value
is 1 degree.
OPTION #31 - Number of lines on a printed page. Default value is 60 lines
per page.
OPTION #32 - This option allows you to select your printer type. Option
0 selects an 8/9-pin Epson printer, option 1 selects an IBM ProPrinter,
option 2 selects an HP LaserJet printer, and option 3 selects an Epson-
compatible 24-pin printer. Default value is 0.
NOTE: For the next eight options (#33 - #39) you need do nothing if your
printer is Epson compatible. Check your printer manual for details. All
option setting numbers shown for these options are in decimal.
OPTION #33 - This value is your printer's code for the FORM FEED command.
Default value is 12.
OPTION #34 - This value is your printer's code for the BEGIN COMPRESSED
PRINTING command. Default value is 15.
OPTION #35 - This value is your printer's code for the END COMPRESSED
PRINTING or BEGIN 10 CHARACTERS PER INCH (10 CPI) PRINT command. Default
value is 18.
OPTION #36 - This value is your printer's next code after the ESCAPE code
(ESC = 27) for the RESET command. Default value is 64.
OPTION #37 - This value is your printer's next code after the ESCAPE code
(ESC = 27) for the VARIABLE LINE SPACING command. Default value is 65.
OPTION #38 - This value is your printer's next code after the ESCAPE code
(ESC = 27) for the SINGLE DENSITY GRAPHICS command. Default value is 75.
OPTION #39 - This value is your printer's next code after the ESCAPE code
(ESC = 27) for the DOUBLE DENSITY GRAPHICS command. Default value is 76.
OPTION #40 - This value is your IBM ProPrinter's next code after the
ESCAPE code (ESC = 27) for the 10 CHARACTERS PER INCH (10 CPI) PRINT
command. Default value is 80.